Auto update
You can update new software automatically.
1. Display the menu with MENU.
2. Select
Setup
>
System Menu
Standby
and press
3. Select
Immediately
If System Update is performed, the software will be updated (TV functions
●
may be changed). If you do not want to do so, set
Standby
to Off.
Every time you set, the TV automatically performs search in Standby and
●
downloads an update if any software updates are available.
The automatic updating cannot be performed in the following conditions:
●
– TV turned off with Mains Power On / Off switch
– Recording is in progress.
= Note =
Download may take a few hours.
●
During software download and update, DO NOT switch off the TV.
●
A notification message may be a reminder. In this case, schedule
●
information (the date when the new version can be used) will appear. You
can set the reservation for update. The update will not start when the TV is
off.
>
System Update
OK
to access.
/
1 hour after
/
Off
and press
- 218 -
>
Auto Update Search in
OK
to set.
Auto Update Search in