Epson EcoTank ET-M1170 User Manual page 156

Table of Contents

• Align the print head.

• Adjust the print quality in the product software.

• Clean the paper path.

• If you printed when the ink level was too low to be seen in the ink tank window, refill the ink tank to the

upper line and run the Power Cleaning utility. Then run a nozzle check to see if print quality has

improved.

• If you have not used the product for a long time, run the Power Cleaning utility.

Note: Power Cleaning consumes a lot of ink, so run this utility only if you cannot improve print quality

by cleaning the print head.

Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that

extends beyond the base of the product in all directions.

Parent topic:

Solving Print Quality Problems

Related concepts

Print Head Nozzle Check

Print Head Cleaning

Print Head Alignment

Power Cleaning

Related references

Paper Specifications

Related tasks

Cleaning the Paper Path

Selecting Basic Print Settings - Windows

Selecting Extended Settings - Windows

Selecting Basic Print Settings - Mac