3. Basic Operations
This chapter describes basic NAS operations.
Power button
Operation
Power on
Power off
Force power off
Reset button
Important
• The default "admin" account is automatically enabled after the system reset.
• To protect your device from brute force attacks, QNAP recommends disabling the
default "admin" account after a system reset. To disable the account, change the
default admin password, log out of QTS, and then log in to QTS with another admin
account.
User Action
Press the button once.
Press and hold the button for 1.5
seconds.
Press and hold the button for 10
seconds.
Result
The device powers on.
The device powers off.
The device powers off.
Important
Use this method only when
the device is unresponsive.
TS-1655 User Guide
Basic Operations
56