Changing The "Sound" Setting - Sony Trinitron WEGA KV-SW212 Operating Instructions Manual

x

Changing the "Sound" setting

The "Sound" menu allows you to adjust settings below.
1
Press WEGA GATE and select "Settings".
2
Press V or v to select the "Sound" icon ( ), then press
3
Press V or v to select the desired item (e.g., "Sound Mode"), then press
Select
"Sound Mode"
"Balance"
"Intelligent Volume"
"Surround"
* You can adjust the setting to your personal preference in the "Sound Adjustment"
option only when the "Custom" mode is selected.
Adjusting the "Sound Adjustment" items under "Custom"
mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of "Custom" mode in the menu.
1
Make sure that "Adjust" is selected, then press
Selecting "Reset" will set your TV to the factory settings.
2
Press B or b to select the desired sound frequency, then press V or v to
adjust the setting and press
The adjusted settings will be received when you select "Custom".
Notes
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
• You may display the settings directly by using the SOUND MODE button on the top control
panel (KV-SW212M50/SW212P50 only) (see page 7) or
(see page 11).
16
To
choose either "Dynamic" (low and high tones), "Standard"
(voice and high tones) or "Custom"*.
Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select "On", then press
To cancel, select "Off", then press
choose either "On" (surround), "Simulated" (stereo-like
monaural sound) or "Off".
.
.
.
.
.
button on the remote control
.