Advertisement
Device Application Notes For NetVault
Drive Selection
Select the Drive Selection tab. Select Server/Client machine and open it to view the attached
tape drives.
Add Drive 1 by selecting the drive and verify the correct device is displayed in the Selected
Drives area on the right. (Figure 2.)
If there are more drives in the library, add the remaining drives, mapping them to each drive
bay. Ensure the Drive Bay number is correct before selecting.
Change the Library Name if desired or leave as default.
BakBone Software, Inc.
Figure 2. Drive Addition Within NetVault
5
Revision A7
10/24/2003
Advertisement
