Eu Declaration Of Conformity - Dimas CS 2512 Operator's Manual

Operator's Manual CS 2512

EU declaration of conformity

EU declaration of conformity
Dimas AB, Box 2098, 550 02 Jönköping, Sweden, tel: 036-570 60 00, hereby declares that
the wire saw CS 2512, from serial number 01001 onwards, is manufactured in compliance
with the Council's machinery directive 98/37/EC, low-voltage directive 73/23/EEC and
EMC directive 89/336/EEC, including subsequent amendments, and that the following
standards have been used for guidance: EN 55 014-1, EN 55 014-2, EN 61 000-3-2,
EN 50 144-1, EN 13 862.
Jönköping 2005-01-01
Christer Carlberg
Managing Director
English - 17