Advertisement
Quick Links
FS 500 F
LE FABRICANT
IL FABBRICANTE
EL FABRICANTE
MANUFACTURER
DER HERSTELLER
DE FABRIKANT
O FABRICANTE
Christer Carlberg
Operations Manager
Electrolux Construction Products
DÉCLARATION DE CONFORMITÉ AUX DIRECTIVES EUROPÉENNES
F
DICHIARAZIONE DI CONFORMITA' ALLE DIRETTIVE EUROPEE
I
DECLARACIÓN DE CONFORMIDAD CON LAS DIRECTIVAS EUROPEAS
E
DECLARATION OF CONFORMITY WITH EUROPEAN DIRECTIVES
GB
EG-RICHTLINIEN - KONFORMITÄTSERKLÄRUNG
D
VERKLARING VAN CONFORMITEIT MET DE EUROPESE RICHTLIJNEN
NL
DECLARAÇÃO DE CONFORMIDADE COM AS DIRECTIVAS EUROPEIAS
P
DIMAS FRANCE
41260 LA CHAUSSEE SAINT VICTOR
Tél. 02 54 56 44 00 – Fax 02 54 56 44 44
Manuel d'utilisation et d'entretien
Scie de sol
Manuale di istruzioni
Sega per pavimentazioni
Manual de instrucciones
Sierra de piso
Operating instructions
Ground-Cutting Saw
Betriebs- und Wartungsanleitung
Fugenschneider
Gebruiksaanwijzing
Vloerzaag
Manual de instruções
Serra de solo
déclare que la machine désignée ci-dessus
dichiara che la macchina sotto indicata
declara que la máquina designada a continuación
declares that the machine described above
erklärt hiermit, daß nachstehende Maschine
Verklaart bij deze dat de hierboven aangegeven machine
declara que a máquina abaixo designada
Advertisement
Related Manuals for Dimas FS 500 F
Summary of Contents for Dimas FS 500 F
-
Page 1: Operating Instructions
FS 500 F Manuel d'utilisation et d'entretien Scie de sol Manuale di istruzioni Sega per pavimentazioni Manual de instrucciones Sierra de piso Operating instructions Ground-Cutting Saw Betriebs- und Wartungsanleitung Fugenschneider Gebruiksaanwijzing Vloerzaag Manual de instruções Serra de solo DÉCLARATION DE CONFORMITÉ AUX DIRECTIVES EUROPÉENNES DICHIARAZIONE DI CONFORMITA' ALLE DIRETTIVE EUROPEE DECLARACIÓN DE CONFORMIDAD CON LAS DIRECTIVAS EUROPEAS... -
Page 2: Preface To The Manual
PREFACE TO THE MANUAL The manual should always be available at the place of work. It should be read and used by any person installing or using the machine. The obligatory technical regulations in force in the country where the machine is used must also be adhered to for maximum safety. -
Page 3: Special Instructions
Technical specifications Depth of cut Nominal weight SPECIAL INSTRUCTIONS Operating weight Dimensions Blade shaft RPM Blad Tank POWER PRESSURE VIBRATION MODEL LEVEL LEVEL LEVEL Lwa (dB) Lpa (dB) MODEL / EN ISO 3744 EN ISO 4871 EN V 25349 KW / BHP HONDA GX 390 0.85... -
Page 4: Electrical Safety
MACHINE WITH ELECTRIC MOTOR Starting up Danger: risk of injury - ELECTRICAL SAFETY : Always pay extreme care and attention to the preparation of the machine before starting up Remove all adjustment tools and wrenches from floor machine - The RCCB must be used Always keep blade guard in correctly, including testing it place... -
Page 5: Engine Oil
ENGINE OIL To stop If the battery does not need any OIL FILTER servicing, the battery clips must be maintened in good condition. Motor off. In the event of prolonged immobilization, disconnect the clips and recharge the battery to keep it in functioning condition. Emergency stop (engine) : The manufacturer declines all... - Page 6 FIG. 1 ABB. 1 FIG. 2 ABB. 2 FS 500 F...
- Page 7 FIG. 3 ABB. 3 FIG. 4 ABB. 4 FS 500 F...
- Page 28 DIMAS Construction Business Group ........
- Page 29 To benefit from the warranty, it is mandatory to return, within eight days after the purchase, the attached warranty certificate Warranty certificate Place here sticker or serial Nr.