Amart Furniture ALLCOT 67803 Assembly Instruction

Dining chair

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.

For any assistance with assembly or for missing parts please phone Amart

Furniture, Customer Service Free call 1800 351 084

ASSEMBLY INSTRUCTION

ALLCOT DINING CHAIR

ITEM CODE - 67803

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.

For any assistance with assembly or for missing parts please

phone Amart Furniture, Customer Service Free call 1800 351 084

PAGE 1 OF 4

67803

Table of Contents

Need help?

Do you have a question about the ALLCOT 67803 and is the answer not in the manual?

Page 1 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture, Customer Service Free call 1800 351 084 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart...
Page 2 PRE-ASSEMBLY PREPARATION BEFORE YOU START… 1. CHOOSE A CLEAN, LEVEL, SPACIOUS ASSEMBLY AREA. AVOID HARD SURFACES THAT MAY DAMAGE THE PRODUCT. 2. TAKE CARE WHEN LIFTING. PRODUCT SHOULD BE ASSEMBLED AS NEAR AS POSSIBLE TO THE POINT OF USE. 3. CHECK AND ENSURE THAT YOU HAVE ALL THE REQUIRED CONTENTS FOR COMPLETE ASSEMBLY. 4.
Page 3 ATTACH SEAT (1) TO LEGS (2) WITH BOLT (A), FLAT WASHER (B) AND SPRING WASHER (C ), TIGHTEN WITH ALLEN KEY (D) IMPORTANT NOTE - BEFORE FINALLY TIGHTENING THE BOLTS, PLACE THE ASSEMBLED CHAIR UPRIGHT ON A LEVEL SURFACE AND SIT CAREFULLY ON THE CHAIR TO ENSURE THE CHAIR LEGS ARE ALIGNED AND LEVEL.
Page 4 CARE AND MAINTENANCE •PROTECT FROM DIRECT SUNLIGHT •REGULARLY DUST WITH A CLEAN DRY DUSTER. WIPE OCCASIONALLY WITH CLEAN DAMP CLOTH •DO NOT REMOVE CUSHION COVERS FOR SEPARATE CLEANING •DO NOT DRY CLEAN •DO NOT USE SHAMPOO •DO NOT USE DISHWASHING OR LAUNDRY DETERGENTS •DRY IN SHADE AWAY FROM DIRECT HEAT •DO NOT WET FILLING •WIPE WITH A CLEAN DRY CLOTH...