Qstarz GM-Q778 User Manual

Gps mouse usb driver

1. System Requirements

CPU: IBM, Pentium or compatible PC

Memory: 16MB

System: Microsoft Windows 98/ME/2000/XP

Graphic Adapter: VGA

Copy

<Win98_ME> or <Win2000_XP> folder from CD

Connect

GPS Mouse to computer. Computer will detect the new

device, then starts the installation program, please select the path to

the <USB Driver> folder in your computer.

Restart

computer.

GPS Mouse USB Driver

to hard

disk.

Table of Contents

Do you have a question about the GM-Q778 and is the answer not in the manual?

Page 1 GPS Mouse USB Driver 1. System Requirements CPU: IBM, Pentium or compatible PC Memory: 16MB System: Microsoft Windows 98/ME/2000/XP Graphic Adapter: VGA 2. USB Driver Installation Copy <Win98_ME> or <Win2000_XP> folder from CD Connect GPS Mouse to computer. Computer will detect the new device, then starts the installation program, please select the path to the <USB Driver>...
Page 2 3. After Installation Verify the COM port # to start using your own navigation software. Click <Start> menu, select <Settings>, then enter <Control Panel>. After entering <Control Panel>, select <System>...
Page 3 Select <Device Manager>, find the <Universal Serial Bus Controller> and check the Virtual COM Port, which was created by the USB driver, i.e. USB to Serial Port (COM#). Please note that the Virtual COM Port number might be different from every computer. Ex: Setup your GPS navigation program with COM3, Baud Rate: 9600...
Page 4 Note!! Before using navigation software, please confirm the COM Port numbers created by your computer and provided by your navigation software. Otherwise, the navigation software won’t receive the satellite signal, because of the un-match COM Port setting. APPENDIX A: Introduction of the files on disk. 1.