Bosch SPS2IKI04E Information For Use page 34

en Basic settings
Basic setting
Remote Start
Factory setting
1
Factory setting (may vary according to model)
Setting Extra Dry
Press ⁠ .
1.
To open the appliance settings,
2.
press
flashes.
a
Press
3.
and flash.
Press repeatedly until the
4.
LEDs show the right value.
A
If LED A is not lit up, Extra Dry is
switched off.
If LED A is lit up, Extra Dry is
switched on.
To save the settings, press
5.
for 3 seconds.
34
Selection
Scale with 3 levels
Reset
for 3 seconds.
repeatedly until
Description
Activate or deactivate the
function.
→ "Activating Remote
Start ", Page 35
This basic setting is not
available until you have
connected the appliance
with the Home Connect
app.
→ "Home Connect ",
Page 35
Restore changed set-
tings to the factory set-
tings.
The settings for initial
start-up must be con-
figured.
→ "Restoring factory set-
tings", Page 35
Set Wi-Fi
Press ⁠ .
1.
To open the appliance settings,
2.
press
flashes.
a
Press
3.
and flash.
Press repeatedly until the
4.
LEDs show the right value.
A
If LED A is not lit up, the wireless
network connection is switched off.
If LED A is lit up, the wireless net-
work connection is switched on.
To save the settings, press
5.
for 3 seconds.
for 3 seconds.
repeatedly until