Product Overview - Inateck KB02009 Instruction Manual

English

1. Product Overview

⑤
⑥
① Power Button： Long press for 3 seconds. The green LED indicator light stays on for 3 seconds and
then goes off when the keyboard is turned on. To turn off the keyboard, long press the button again, and
the green indicator will flash 3 times and then go off.
Low Battery Indicator: Red light flashes when it is time to recharge.
② Battery Indicator：Red light is on when the keyboard is being charged. It turns green once the keyboard
is fully charged.
③ Bluetooth Status Indicator： Press Fn+
keyboard is under Bluetooth pairing mode. The blue light will go off once Bluetooth is successfully paired.
④ Micro-USB Charging Port
⑤ Caps Lock Indicator： The green indicator is on when the caps lock is enabled; otherwise, it goes off.
⑥ Fn Key Locks Indicator:
When the Fn Lock is enabled, the green indicator will be on. Otherwise, it will be off. Refer to "The way to
use F1-F12" for more details.
simultaneously, and the blue light flashes which means the
1
2. To power on/power off KB02009
Power on: Press and hold
3 seconds.
Power off: Press and hold
times.
3. To pair KB02009 with a Surface Go
Step 1: Long press
when the keyboard is turned on.
Step 2: Press Fn+
pairing mode.
①
Step 3: On the Surface Go, select All settings – Devices - Add Bluetooth or other device-Bluetooth. The
Surface Go will display "inateck KB02009" as an available device.
Step 4: Select "inateck KB02009" on your Surface Go.
Step 5: The Bluetooth indicator goes off, which means the keyboard has been paired with Surface Go
successfully.
Note
1. After one successful paring, the Bluetooth keyboard and the Surface Go can be automatically paired in
future. However, when interference exists or the Bluetooth signal on Surface Go is unstable, the automatic
paring might fail. In that case, please do as following.
②
a. Delete all Bluetooth pairing record related to KB02009 on your Surface Go
③
b. Turn off Bluetooth on your Surface Go
c. Follow 'To pair KB02009 with a Surface Go' to connect.
④
2. The way to restore Bluetooth keyboard to factory modePress
Fn + shift (left) + Backspace simultaneously.
3. To improve the battery life, the keyboard cannot be wakened up by touching the touchpad when it is in
sleep mode. Please wake it up by pressing any button instead.
4.Guide of the keyboard backlight
1. Press +
2. Press +
3. When the battery level is lower than 20%, the backlight turns off automatically.
4. The backlight is not available unless the keyboard is paired with a Surface Go.
5. Uses of Function Keys
1).The way to use F1-F12
Fn Lock disabled (default state) ：
Press to dim the brightness of the screen. Press Fn+
owned by F1 key.
for 3 seconds to turn the keyboard on while the green indicator keeps on for
for 3 seconds to turn the keyboard off while the green indicator flashes 3
for three seconds, the green indicator keeps on for 3 seconds and then goes off
simultaneously, the blue light flashes which means the keyboard is under Bluetooth
simultaneously to adjust the color of backlight. There are 7 colors available in total.
simultaneously to adjust the brightness of the backlight. Three levels for choices.
2
simultaneously to use the functionality