Table of Contents
Advertisement
RF Hybrids System Manual
Max Power for IN Port (in test mode)
Max Power for LINE Port (in test mode)
Max Insertion Loss (when in service)
Min Isolation from IN to LINE (in test mode)
TX Reflected Power (in test mode)
TX Reflected Power
(in service w/50 ohms 1% load tied to LINE port)
RF Signal LED Turn-On Threshold
(normal LED jumper setting)
RF Signal LED Turn-On Threshold
(bright LED jumper setting)
Page 3–4
Table 3–7. PLC Test Board Specifications.
Specification
Frequency Range
Value
30–535 kHz
20 W Continuous, 40 W for 2 min.
10 W Continuous, 20 W for 2 min.
0.2 dB
50 dB
<0.5 %
<0.5 %
+23 dBm (0.2 W) Signal Level
+20 dBm (0.1 W) Signal Level
April 2023
Advertisement
Table of Contents
