588
6-3. Do-it-yourself maintenance
Set the connector.
6
After installing the connector,
shake the bulb base gently to
check that it is not loose.
Set the connector and install
7
the cover.
Before installing the cover, turn
the headlight low beams on
once and visually confirm that
no light is leaking through the
mounting.
For the right side only: Move the washer tank inlet and install the
8
securing clip.
Daytime running lights/headlight high beams
■
For the right side only: Remove the securing clip. Then move the
1
washer tank inlet. (P. 586)
Turn the bulb base counter-
2
clockwise.
Unplug the connector while
3
pressing the lock release.
RAV4_OM_OM42A04U_(U)