Hanging The Fan; Wiring The Fan - Hunter 55079 Installation Manual

1
While holding the wires out of the way, lift the
motor assembly and place the square hanger
into the opening in the ceiling bracket. Be sure
the ground wire attached to the hanger faces
out of the large opening in the ceiling bracket.
We know wiring is hard. Let's make it easier.
Follow these steps to get your fan wired quickly and safely. Follow the route be-
low that best matches your wall switch setup. If you are unfamiliar with wiring or
uncomfortable doing it yourself, please contact a qualified electrician.
Have a single switch?
Follow these steps:
Connect the three
grounding wires (green,
green/yellow stripe, or
bare copper) coming from
the ceiling and hanging
bracket.
Have dual switches?
Follow these steps:
Connect the second
ungrounded (light)
wire from the
ceiling to the blue Blue
wire from the fan.
Connect the three
grounding wires (green,
green/yellow stripe, or
bare copper) coming from
the ceiling and hanging
bracket.
Ceiling Bracket Hanging Fan
Grounding
Grounding
Wiring Canopy

Hanging the Fan

2
Once the motor is in the ceiling bracket,
use the two locking screws found in the
hardware bag to secure the motor
to the ceiling bracket.

Wiring the Fan

Blades Light
Hunter Pro Tip:
Here is how to connect the wires:
Push the bare metal ends of the wires together and slide a wire
nut over them. Then, twist the wire nut clockwise until tight.
Give it a gentle pull to make sure none of the wires are loose.
Connect the white
(grounded) wire from
the ceiling to the white
wire from the fan.
White
Connect the black
(ungrounded) wire from
the ceiling to the black
wire from the fan.
Cap the blue wire from the
fan. You will not need it for
single switch wiring.
Hunter Pro Tip:
Have extra wiring?
Turn the wires upward and push them carefully back through
the hanger bracket into the outlet box. Make sure that the
wires are still attached to the wire nuts.
Connect the white
(grounded) wire from
the ceiling to the white
wire from the fan.
White
Connect the black wire
(ungrounded) from the
ceiling to the black
wire from the fan.
Black
Remote Remote Cradle
1886
x2
bag
Locking
Screw
x4
bag
Wire Nut
x4
bag
Wire Nut
4
Troubleshooting