Installing The Canopy; Installing The Blades - Hunter Cedar Key Installation Manual

1886
Secure each blade to a blade iron as shown using the blade nuts, found in the
hardware bag, and the blade assembly screws, found in the
7
Ceiling Bracket Hanging Fan

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades:

hardware bag.
Repeat x5
Wiring Canopy
Insert the two canopy screws
found in the hardware bag.
Lightly attach the blade arms to the
motor with the blade arm screws,
then securely tighten after both
screws are attached.
Blades Light
x2
Canopy Screw
bag
Blade Screw
bag
Blade Nut
bag
Remember the screws that you
kept after removing the shipping
blocks? You need them here.
x10
Blade Arm Screw
Repeat x5
Remote Remote Cradle Troubleshooting
x15
x15