Installing The Blades - Hunter Hartland Installation Manual

1886
Insert grommets found in the
holes in the blades, then secure each blade to a blade arm
with screws found in the hardware bag.
Repeat x5
7
Ceiling Bracket

Installing the Blades:

hardware bag into the
Hanging Fan Wiring
Note:
Fan style may vary.
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Hanging Fan (Cont.) Blades
bag
bag
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Remember the screws that
you kept after removing the
shipping blocks? You need
them here.
Blade Arm Screw
Repeat x5
Note:
Fan style may vary.
Light Glass/Bulbs
x15
Blade Screw
x15
Grommet
x10
Pull Chain