Hunter Hartland Installation Manual page 7

Swing the fan up to align the
canopy screw holes with the
mounting holes on the ceiling plate.
Note: The slots in the canopy must
remain engaged while swinging the
canopy for alignment.
Partially install a canopy screw, found
in the hardware bag, between
the ceiling plate hooks. When all the
holes are properly aligned, securely
tighten all three canopy screws.
Ceiling Bracket Hanging Fan
Hanging the Fan (Continued)
3 of 3
Canopy
bag Screws
Wiring Hanging Fan (Cont.)
Hold the canopy up with the screw holes
aligned. Partially install two canopy screws,
found in the hardware bag, into the
holes opposite the ceiling plate hooks.
Blades Light
2 of 3
Canopy
bag Screws
Note:
Fan style may vary.
Glass/Bulbs Pull Chain
1886
6