Control Panel - AEG OSC5D181ES User Manual

3.5 Door reversibility
Please refer to the separate document
with instructions on installation and door
reversal.

4. CONTROL PANEL

Temperature indicator LED
1
Alarm light
2
Frostmatic indicator
3
Frostmatic button
4
Temperature regulator
5
ON/OFF button
4.1 Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator
button if all LED indicators are off.
4.2 Switching off
Keep touching the temperature regulator
button for 3 seconds.
All indicators light off.
4.3 Temperature regulation
To operate the appliance, touch the
temperature regulator until the LED
corresponding to the required
temperature lights up. Selection is
progressive, varying from 2°C to 8°C.
Recommended setting is 4°C.
1. Touch temperature regulator.
Current temperature indicator blinks. Any
time you touch the temperature
regulator, the setting moves by one
position. The corresponding LED blinks
for a while.
2. Touch the temperature regulator until
the required temperature is selected.
CAUTION!
At every stage of reversing
the door protect the floor
from scratching with a
durable material.
1 1 2 2 3
5 4 3 4
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
4.4 Frostmatic function
The Frostmatic function is used to
perform pre-freezing and fast freezing in
sequence in the freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time,
protects food products already stored in
the freezer compartment from
undesirable warming.
To freeze fresh food activate
the Frostmatic function at
least 24 hours before placing
the food to complete pre-
freezing.
To activate Frostmatic function press the
Frostmatic button. The Frostmatic
indicator switches on.
This function stops
automatically after 52 hours.
It is possible to deactivate the function at
any time by pressing Frostmatic button
again. The Frostmatic indicator switches
off.
ENGLISH 9