Volvo V60 2018 Owner's Manual page 639

Replacing the wiper blade, rear window
Lift the wiper arm from the windscreen and pull the
upper section of the blade diagonally down to the right.
Grip the centre of the wiper arm and lift it
from the windscreen to lock position.
NOTE
There is a lock position at half extension
angle that may feel like resistance, this lock
prevents the arm from falling back against the
windscreen. The wiper arm must be pulled
past the lock for wiper blade replacement.
Grip just above the blade's centre bracket
and pull diagonally down to the right until the
blade loosens from the arm.
Lift the cover for the wiper arm's bracket. Be
careful that the wiper arm does not mistak-
enly fall down to the windscreen again.
Loosen the washer hose from the bracket.
Attach the new washer hose with associated
wiper blade into the bracket. Fold down the
cover for the wiper arm's bracket.
NOTE
Make sure that the hose is routed in the
same way as in the illustration. Otherwise it
risks being pinched by the casing when it is
lowered again.
6. Press the new wiper blade into place. You
should hear a click. Check that it is firmly
installed.
MAINTENANCE AND SERVICE
7. Lower the wiper arm.
IMPORTANT
Check the blades regularly. Neglected main-
tenance shortens the service life of the wiper
blades.
Related information
Using the rain sensor (p. 171)
•
Using windscreen and headlamp washers
•
(p. 173)
Using automatic rear windscreen wiping
•
when reversing (p. 175)
Using the rain sensor's memory function
•
(p. 172)
Using the rear window wiper and washer
•
(p. 174)
Filling washer fluid (p. 640)
•
Wiper blades in service position (p. 639)
•
Replacing windscreen wiper blades
•
(p. 638)
Using windscreen wipers (p. 170)
•
Wiper blades and washer fluid (p. 170)
•
637