Calibrate The System For Tyre Pressure Monitoring - Volvo V60 2018 Owner's Manual

pillar for Volvo's recommended tyre pres-
sures.
If you change to tyres of a different size to
•
the ones fitted at the factory, the system
must be calibrated for these tyres to avoid
false warnings.
If a spare wheel* is used, it is possible that
•
the tyre pressure monitoring system does not
work correctly due to the differences
between the wheels.
The system does not replace the need for
•
regular tyre inspection and maintenance.
It is not possible to switch off the tyre pres-
•
sure monitoring system.
WARNING
Incorrect tyre pressure may lead to tyre
•
failure, which could result in the driver
losing control of the car.
The system cannot indicate sudden tyre
•
damage in advance.
Related information
Recommended tyre pressure (p. 551)
•
See tyre pressure statue in the centre dis-
•
play* (p. 555)
Action in the event of warning for low tyre
•
pressure (p. 556)
Indirect Tyre Pressure Monitoring System (ITPMS)
4
Calibrate the system for tyre pressure moni-
•
toring* (p. 553)
WHEELS AND TYRES
Calibrate the system for tyre
pressure monitoring*
In order for the system for tyre pressure monitor-
4
ing to work correctly, a reference value for the
tyre pressure must be determined. This must be
performed each time the tyres are changed or
the tyre pressure is changed.
For example, when driving with a heavy load or at
high speed above 160 km/h (100 mph), the tyre
pressure should be adjusted in accordance with
Volvo's recommended tyre pressure values. Fol-
lowing which, the system must be recalibrated.
1. Switch off the car.
2. Inflate the tyres to the correct pressure, see
the decal on the door pillar on the driver's
side showing the recommended pressure for
factory fitted tyres.
3. Start the car.
4. Open the Car Status app in the app view.
}}
553
* Option/accessory.