Fujitsu E22-8 TS Pro Operating Manual page 19

3
3x
For instructions on how to mount the swivel arm or a similar accessory, please
see the documentation for the swivel arm or similar accessory.
Fujitsu
4
3x
6 5
► Remove the three screws at the bottom
of the foot (3) and separate the foot
from the hinge (4).
► Remove the three screws at the hinge
(5) and separate the hinge from the
rear of the monitor (6).

You can now mount a swivel arm or a
similar accessory in accordance with VESA
FPMPMI using a hole spacing of 100 mm.
Getting started
15