and keep it away from children. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate medical
attention. In the US call the National Poison Control Center at 1-800-222-
1222 or 202-625-3333. In Canada call 416-813-5900.
INSTALLATION WARNING—To reduce risk of fire, electrical shock and injury to
persons, observe the following:
- Place this product away from curtains, draperies, tablecloths and other fabrics,
since they may be drawn into the fan, damage the motor and/or cause a fire.
- No part of this product (the appliance, power cord, plug, packaging, etc.)
should be placed near furnaces, fireplaces, stoves or other high temperature
heat sources. Do not use this product in a window, on an uneven or unstable
surface, or near water.
- The appliance, power supply, power cord and plug cannot come into contact
with water. Do not use this product on wet surfaces. Do not use this product in a
bathtub or shower or position product where it may fall into a bathtub, laundry,
swimming pool or other water container. Do not use this product outdoors or
expose it weather or elements.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
similar coverings. Do not route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped over. The cord should not
hang over edges of counters or be placed where it can be crimped or closed in
doors. Place appliance near an easily accessible outlet so the product can be
unplugged quickly during an emergency.
SAFE USE WARNING—To reduce risk of fire, electrical shock and injury to persons,
observe the following:
- WARNING: To reduce likelihood of circuit overload, fire and electric shock, do
not operate with a solid state speed device, such as a dimmer control switch.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to
an authorized service facility for examination and/or repair. Do not operate
English
5
Need help?
Do you have a question about the RISE 40 and is the answer not in the manual?