England's Stove Works 55-TRPCB120 Installation & Operation Manual page 43

Vacuum Switch
 Before beginning any component replacement, be certain the unit is unplugged and
thoroughly cooled down.
 Remove the right side panel (see p. 42 for panel instructions).
 Locate the vacuum switch as shown in the diagram below.
 Disconnect the stove wiring harness and vacuum hose from the vacuum switch, taking note
of where connections were made.
 Remove the (2) screws which hold the vacuum switch to the vacuum switch bracket, using
a Phillips screw driver.
 Installation is the reverse of removal; be absolutely certain the wires and vacuum hose are
connected as they previously were (and according to the wiring diagram in this manual).
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING CLEANING THE UNIT AS SPECIFIED, AND
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE TO UNSAFE INSTALLATION OR
REPLACING COMPONENTS
REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY QUESTIONS.
43