Hunter Omnia Installation Manual page 3

We recommend that you pull everything out of the box and lay it out. We have
grouped the drawn components below with the hardware you'll need for those
parts. The screws below are drawn to scale to make it easier to identify what
piece of hardware is needed to install each component.
bag
For installing the hanger bracket and wiring the fan
x10
Blade Washer
bag
x5
Blade
For installing the blades
Wall Control and Extra Downrod
Spare Parts
bag
For your convenience,
you may receive extra fasteners.
M3887-01 r041421
Here is what comes in your box:
Wood Screw
Wire Nut
Washer
x2 x4
x10
Blade Screw
bag
Note:
Fan style may vary.
Hunter Pro Tip:
x2
Find a part that is missing or damaged?
Don't take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed on
each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
Ceiling Bracket
Canopy
bag
For installing the canopy
Downrod
Motor
x4
Cap Screw
bag
Lower Switch Housing Cap
1.888.830.1326.
1886
Canopy
Screw
x2
2