Breeze CMD Series User Manual page 8

Table of Contents

Advertisement

We bring better air to life
12. TRANSPORT AND STORAGE
Transport
Our products are packed at the factory to suit the respectively agreed mode of transportation. Transport the fan in its original
packaging.
Fans are protected against damage during shipment. If the unit cannot be installed and operated immediately, precautions need
to be taken to prevent deterioration of the unit during storage. The user assumes responsibility of the fan and accessories while
in storage. The manufacturer will not be responsible for damage during storage. These suggestions are provided solely as a
convenience to the user.
Only use suitable means of transport, such as pallet trucks or fork-lift trucks or hoist machine.
If the fan is to be transported by hand, ensure that supporting and carrying loads are kept within reasonable limits for the
personnel involved.
The fans must not be dropped or thrown. Avoid scratches or rough handling during loading and unloading.
Parts which have been stacked too high can collapse.
Avoid a distortion of casing or blades or other damage.
Danger ! Do not step under hanging loads.
Storage
Store the unit in the manufacturer's original packaging box in a dry closed ventilated premise with temperature range from +5˚С
up to +40˚С and relative humidity up to 85%.
Store the fan in a dry, weather-protected location in its original packaging or protect it from the effects of dirt and the weather
until final assembly. Storage environment must not contain aggressive vapours and chemical mixtures provoking corrosion,
insulation and sealing deformation.
Rotate fan impeller monthly and purge bearings once every three months.
If storage of fan is in a humid, dusty or corrosive atmosphere, rotate the fan and purge the bearings once a month. Improper
storage which results in damage to the fan will void the warranty.
Avoid lengthy storage periods (a maximum of one year is recommended) and check that the motor bearing assembly is in good
functional order prior to fitting. With storage times of more than 1 year, please check the bearings on soft running before
installation (turn by hand).
www.breeze.com.vn | breezefans@breeze.com.vn
Thank you for your cooperations!
USER'S MANUAL
CMD SERIES
07

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmd 160dCmd 160aCmd 210a

Table of Contents