SAFETY CHECKLIST
Before every ride, it is important to carry out the following safety checks:
Brakes:
•
Ensure front and rear brakes work properly.
•
Ensure brake pads are not over worn and are correctly positioned
in relation to the rims.
•
Ensure brake control cables are properly lubricated, correctly
adjusted, and display no obvious wear.
•
Ensure brake control levers are properly lubricated and tightly
secured to the handlebar.
Derailleurs:
•
Check that the front and rear derailleurs are adjusted and
functioning properly.
•
Ensure that the shi er levers are securely attached.
•
Ensure that derailleurs, shi levers, and control cables are properly
lubricated.
•
Shi through all the gears while pedaling to ensure that the
derailleurs are adjusted and functioning properly.
Cranks & Pedals:
•
Ensure pedals are securely tightened to the cranks.
•
Ensure cranks are securely tightened to the bottom bracket and
are not bent.
Frame & Fork:
•
Check that the frame and fork are not bent, broken, or cracked.
•
If either are found to be bent, broken, or cracked, they should be
replaced.
Wheels & Tires:
•
Ensure tires are inflated to within the recommended range as
displayed on the tire sidewall.
•
Ensure tires have tread and have no bulges or excessive wear.
•
Ensure rims run true and have no obvious wobbles or kinks.
•
Ensure all wheel spokes are tight and not broken.
•
Check that axle nuts are tight.
•
Do not over inflate.