• Perform regular checks to ensure the screws and components are secure and the bike is not damaged. If damaged, stop use immediately and contact help.Kogan.com for assistance. Cleaning and care • Clean the bike body with a dry cloth. If there is significant dirt, wash the bike with water and dry with a cloth.
Page 4
COMPONENTS A Front bike frame (x1) A-1 Rear bike frame (x1) B Handlebar (x1) C Front wheel assembly (x1) C1 Pedal fixture (x1) D Saddle (x1) E Allen key/Phillips head screwdriver (x1)
Page 5
ASSEMBLY Step 1: Using the Allen key/Phillips head screwdriver (E), remove the screws secured in the rear bike frame (A-1). Align and insert the rear bike frame (A-1) into the front bike frame (A). Using the Allen key/Phillips head screwdriver (E), insert and tighten the removed screws through the holes of the two components (A, A-1).
Page 6
Step 3: Insert the front wheel assembly (C) through the tube on the front bike frame (A). The top of the front wheel assembly (C) should protrude out slightly. Step 4: Using the Allen key/Phillips head screwdriver (E), loosen and remove the screw and nut from the handlebar (B).
Page 7
Step 5: Using the Allen key/Phillips head screwdriver (E), loosen the back tube on the front bike frame (A). Insert the saddle (D) through the tube at the desired height and using the Allen key/Phillips head screwdriver (E), tighten to secure. Notes: •...
Page 8
CONVERTING TO BALANCE BIKE Press the left and right buttons on the pedal fixture (C1) to release the pedals. Insert the pedals onto either side of the front wheel. They should click into place. This completes the balance bike. Buttons...
Page 9
CONVERTING TO TRIKE Step 1: Press the rear frame button and open the rear legs. This button will pop back up once the legs are fully open. Reinsert the rear wheel lock between the legs to secure their position. Rear frame Rear wheel lock button Note:...
Page 10
CONVERTING TO SLIDE BIKE Press the buttons on the pedals and detach the pedals from the front wheel. Insert them back onto the pedals fixture (C1). These should click into place. This will create the slide bike. USE & FOLDING Handle adjustment In any form (balance bike, trike or slide bike), the angle of the handle can be adjusted to suit your child’s height.
Page 11
Folding After using the bike, it can be folded back for easier storage. Step 1: Press the rear wheel buttons and rotate the rear wheels inwards. Rear wheel button Rear wheel button Step 2: Pull out the rear wheel lock. Press the buttons on the pedals and detach the pedals from the front wheel.
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...