Table of Contents
Advertisement
Search for a Location
If the destination is correct, you can instruct Destinator how to calculate your route by tapping either the
Faster or Shorter button, as described below.
This option selects the route that takes less time. Faster is the default value.
This option selects the route that is the shorter distance. Remember, the shorter route may
not always be the quickest, as you are able to travel faster on some roads than on others.
Note: Route generation does not take into account any detours, stops, or delays along the route.
When you are ready, tap the GO button to create a route to your selected destination.
Recent Locations
The Recent Locations screen lets you select an existing destination from a list of destinations that you
have previously traveled to. Destinator automatically stores the last 64 destinations in memory. As each
new route is added to the top of the list, the older destinations at the bottom are erased.
To navigate to a recently-traveled destination, tap the Recent Locations button. From the Recent
Locations screen, select a location and tap the Show or Next button. A map appears showing the specified
location. Tap the GO button to calculate the route.
1.
2.
Figure 11 -Traveling to a Recent Location
From this screen, you can tap the Actions button to select from the following commands.
Set as Origin
Add to My
Favorites
Delete Item
Clear List
Information
Destinator User Manual
3.
Lets you designate the selected address as the route origin. You would use
this command when calculating a route from a point other than your current
location Note: You are still receiving the GPS signal.
Lets you add an address to your list of favorite locations. For more
information, see "My Favorites" on page 20.
Lets you delete a recent location.
Lets you clear all locations in the Recent Locations screen.
Displays the location's address information.
4.
5.
14
Advertisement
Table of Contents
