Search for a Location
Units of Measure
You can tap the Units of Measure button to specify the measurement system you would
like to use.
You can select:
o
o
o
Map Settings
You can tap the Map Settings button to customize your map display, as shown in the
figure below.
The following map settings are:
Map Orientation
Use Automatic Zoom
Use Larger Print
Extras
From the Options menu, tap the Extras button, to display the Destinator add-ons as described in the
sections below.
Multistop Planner
The Multistop Planner lets you plan a route with up to twelve stops.
When you tap the GO button, the route is calculated in stages, from the departure point to the
first stop. When you reach the first stop, the route recalculates to the second stop, and so on.
User's Guide Destinator
Miles/Yards
th
Miles, 10
of a Mile
Kilometres, Metres
Forward is up – This option orients the map so that your forward direction
is always at the top.
North is up – This option orients the map so that North is always at the
top.
When this option is selected, the zoom is speed dependent. The map
zooms out at higher speeds, displaying a larger map area, and zooms in
at slower speeds, displaying a smaller map area. If you manually change
the zoom, the Automatic Zoom returns to a system defined zoom level
after several seconds of inactivity.
This option increases the size of street names to make the map easier to
read.
30