Advertisement
Direction of Travel
Shift Tongue Left or Right
Between Holes
5/16" Wire
Lock Pins
This safety alert symbol is used to indicate safety instructions. Follow
these instructions to avoid personal injury and/or property damage.
Read and follow all instructions in this manual and the attached engine
manual.
Read all Owners Manuals before using equipment.
Know locations and functions of all controls before operating the mower.
A. TONGUE CONFIGURATIONS AND ADJUSTMENTS
Shut off the engine and allow the mower blades to come to a complete stop before
adjusting the tongue.
The hitching system is designed so that the rough cut mower can be pulled directly behind a tow
vehicle or offset to the left or right. See Figure 4.
Note: When pulling the mower directly behind, the hitch pivot should be fastened on the right
carrier arm for maximum maneuverability. See Figure 2. When pulling the mower in
the offset position the hitch pivot can be fastened on either the right or left carrier arm.
See Figure 2.
The tongue is equipped with a screw pin shackle clevis to provide movement in all directions on
rough uneven ground. To prevent loss of the screw pin due to vibration or debris, place the screw
pin through the tow vehicle hitch and clevis and turn the screw pin until snug.
Figure 3: ATV Tongue Assembly
OPERATIONS AND ADJUSTMENTS
Wire Lock Section of
Wire Lock Pin
(Placed Back From
Direction of Travel)
3
Screw Pin Shackle
Clevis
Tongue
Advertisement
