Philips SatinSoft HP6521 User Manual page 8

EnglisH
8
1 Switch off the appliance before you charge it. Then connect it to a
wall socket.
, The charging light flashes white to indicate that the appliance is
charging.
, When the battery is fully charged, the charging light lights up white
continuously for 20 minutes and then goes out.
Battery low or empty
- When the battery is almost empty, the charging light starts to flash
red. When this happens, the battery still contains enough energy for a
few minutes of epilating.
- When the battery is completely empty, the charging light lights up red
continuously. To charge the epilator, see section 'Charging' above.
using the appliance
Clean the epilating head and charge the appliance fully before you use the
appliance for the first time.
Note: You cannot use the appliance while it is connected to the mains.
Epilating tips
Wet: If you are new to epilation, we advise you to start epilating on
-
wet skin, as water relaxes the skin and makes epilation less painful and
more gentle. The appliance is waterproof and can be safely used in the
shower or bathtub.
Tip: If you want you can use your common shower gel or foam.
- Dry: If you epilate dry, epilation is easier just after taking a bath or
shower. Make sure your skin is completely dry when you start epilating.