Blind Hem - Janome 4030QDC Instruction Manual

Janome 4030QDC Instruction Manual
q
z
q
x
c
v
www.toews.com
w
w
q
e

Blind Hem

e
Machine settings
q Pattern:
w Presser foot:
e Thread tension:
Starting to sew
1 On heavy weight fabrics that ravel, the raw edge
should be overcast first.
Fold the hem leaving a 0.4 – 0.7 cm margin as
w
illustrated.
q
Wrong side of fabric
w
0.4 – 0.7 cm (1/8"~1/4")
2 Place the fabric so the needle just pierces the
edge of the fold when the needle swings to the left.
Lower the presser foot.
3 Sew, guiding the folded edge.
4 Open the fabric after sewing.
e
Right side of fabric
* If the needle pierces too far left, the stitches will
show on the right side of the fabric.
NOTE:
When sewing a blind hem with the zigzag foot, care-
fully guide the fabric so the needle just pierces the
edge of the fold.
58
Janome Sewing Machine 4030QDC
#14
Zigzag foot A
3-6
4030QDC Owners Manual/ User Guide