Philips EP2520 User Manual page 11

Wi-Fi connection
Setting up the Wi-Fi connection for the first time
Make sure to connect your coffee machine to a 2.4 GHz 802.11 b/g/n home Wi-Fi network.
Connecting your coffee machine to your home Wi-Fi network, provides you with an enhanced user
experience.
1 Download the Coffee+ app on your smart device (smartphone or tablet) from the App Store or on
Google Play.
2 Press the on/off button to switch on the machine.
3 Make sure that your smart device is within reach of your home Wi-Fi network before you start the
easy Wi-Fi set-up process.
4 Follow the instructions in the app to connect your coffee machine to your Wi-Fi and to pair your
coffee machine.
5 When the Wi-Fi light on the user interface of the coffee machine is solid on, the coffee machine is
connected. You can check if Wi-Fi installation was successful, by switching the machine on and off
in the app menu. If the Wi-Fi light stays off, then you can check the troubleshooting section in this
booklet to find a solution.
You are now ready to start your connected experience.
This instruction is only valid when the coffee machine is being set up for the first time.
If the network has changed or the setup needs to be performed again, see section 'Resetting the
Wi-Fi connection '.
This app supports the latest versions of Android™ and IOS®. Please check the App Store or Google
Play for the latest update of supported operating systems and devices.
The Wi-Fi setup process can be cancelled in the app or by switching off the coffee machine.
Resetting the Wi-Fi connection
Reset the Wi-Fi connection when your default network has changed.
1 Press the on/off button to switch on the machine.
2 Press then the start/stop
3 Follow steps 4-5 of section 'Setting up the Wi-Fi connection for the first time '.
Adjusting machine settings
Adjusting the stand-by time
1 Press the on/off button to switch off the machine.
2 When the machine is switched off: press and hold the Calc / Clean icon (Fig. 16) until the Calc /
Clean light and the Aroma strength lights go on (Fig. 17).
3 Tap the Aroma strength icon to select the required stand-by time: 15, 30, 60 or 180 minutes.
Respectively 1, 2, 3 or 4 lights of the Aroma strenght icon light up.
button for 3 seconds until the Wi-Fi light starts flashing.
English
11