Operation - Makita CF003G Instruction Manual

OPERATION

CAUTION:
The fan is made from resin. Some
kind of oil agent or chemicals which deteriorate
resin may break the fan and cause an injury.
Starting / stopping the fan
To turn on / off the power of the appliance, follow the procedure below.
1. Turn the air volume control switch in the direction of the
arrow in the figure. The appliance starts at minimum air volume.
► Fig.4: 1. Air volume control switch
2. Turn the air volume control switch in the direction of
the arrow in the figure to the
► Fig.5: 1. Air volume control switch
NOTICE:
Do not force the air volume control
switch beyond the
volume control switch may no longer work.
Adjusting fan head angle
The angle of the fan head can be adjusted manually.
To adjust the vertical angle of the fan head, loosen the vertical angle fixing knob. After manually adjusting the angle
of the fan head, tighten the vertical angle fixing knob again.
The adjustable range of the fan head is as shown in the figure.
► Fig.7: 1. Vertical angle fixing knob
NOTICE:
Do not turn the fan head beyond the adjustable range.
Oscillating the fan head
CAUTION:
When oscillating the fan head,
keep obstacles clear of the moving range of the
fan head. The cordless fan may be pushed and fall
by the oscillation.
CAUTION:
Do not stop the oscillation by
holding the fan head. Always press the oscillation
button to stop. Otherwise the appliance may heat up
and cause burns.
The fan head begins to oscillate from the current posi-
tion when the oscillation button is pressed. The range to
oscillate of the fan head changes every time you press
the button (60-degrees / 90-degrees / 120-degrees /
off).
► Fig.8: 1. Oscillation button
NOTE: Point the fan head toward the front before
starting the oscillation.
NOTE: Depending on the fan head position, the fan
head may not oscillate soon after the oscillation but-
ton is pressed because of the oscillation mechanism.
position to turn off the power.
position. Otherwise the air
Adjusting air volume
By turning the air volume control switch during opera-
tion, you can adjust the air volume steplessly.
► Fig.6: 1. Air volume control switch 2. Increase air
volume 3. Decrease air volume
NOTICE:
Do not force the air volume control
switch beyond the indicator being fully lit.
Otherwise the air volume control switch may no lon-
ger work.
Auto-off timer
Press the auto-off timer button while the fan is running. The
duration to activate auto-off timer changes every time you press
the button (1 hour / 2 hours / 4 hours / off). The number under
each auto-off timer indicator shows the remaining hour(s) to turn
off the fan. The auto-off timer indicator will turn off with time.
► Fig.9: 1. Auto-off timer button
NOTE: Depending on the battery cartridge type and
its remaining capacity, the auto-off timer may be
activated earlier than the set time.
Using AC adaptor
WARNING:
cord or plug is damaged.
WARNING:
greasy hand.
WARNING:
connected from the appliance while the power is
supplied from the mains. Small children may put the
live plug in their mouth and cause injury.
WARNING:
your mouth. Doing so might cause an electric shock.
Insert the 13V DC plug of AC adaptor into the 13V DC
socket, and then plug the AC pins into a main power
supply. Make sure that the voltage rating of the main
power supply corresponds with that of the adaptor.
► Fig.10
10 ENGLISH
Never use the appliance when the
Do not handle the plug with wet or
Do not leave the AC adaptor dis-
Do not put the live plug or cord into