Table of Contents
Advertisement
> Before Start
> Part Names
(North American
and Taiwanese
models)
b
a AM loop antenna, b Indoor FM antenna, c Ethernet cable, d Power cord
> Install
a
(European,
Australian and
Asian models)
c
b
> Initial Setup
> Playback
d
(Taiwanese
models)
6. Connect Other Cables
Antenna Hookup
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
to attach the indoor FM antenna to a wall.
Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy network features such as
internet radio by connecting the unit to the network. If you
connect by wired LAN, connect with an Ethernet cable to
the ETHERNET port as shown in the illustration. To connect
by Wi-Fi, then after selecting "Wireless" in "3. Network
Connection" (P23) in Initial Setup, select the desired setting
method and follow the onscreen instructions to configure
the connection.
Power Cord Hookup
The power cord must be connected only after all other
cable connections are completed.
0 Taiwanese models include removable power cords.
Connect the power cord to AC INLET of the unit and then
connect to the outlet. Always disconnect the outlet side
first when disconnecting the power cord.
En
21
Hide quick links:
Advertisement
Table of Contents
