EdenPURE A5986 Owner's Manual
  1. Manuals
  2. Brands
  3. EdenPURE Manuals
  4. Heater
  5. A5986
  6. Owner's manual

EdenPURE A5986 Owner's Manual

Classic heater
Hide thumbs
Table of Contents

Advertisement

Quick Links

What is zone heating?
Zone heating focuses heat where people spend the most time. After all, there is
no point in heating multiple rooms to +68 degrees when not in use.
Can I use an extension cord, surge protector, or power strip with my
heater?
No. The Classic Heater is designed to plug directly into a grounded
120V 15 Amp or higher circuit receptacle. Never use with an extension cord or
relocatable power tap (outlet/power strip).
How many kilowatts per hour does the heater use?
Approximately 1.35 kilowatts per hour.
What is the BTU Rating for the heater?
Approximately 5200 BTUs.
The power cord feels warm to the touch; should I be concerned?
It is normal for the heater's plug and cord to feel warm to the touch. A plug or
cord which becomes hot to the touch or becomes distorted in shape may be a
result of a worn electrical outlet. Worn outlets or receptacles should be
replaced prior to further use of the heater. Plugging this heater into a worn
outlet may result in overheating of the power cord or even a fire.
I don't have a grounded outlet; can I use a cord adapter or remove the
grounding plug?
NO. If you don't have a grounded outlet, contact a licensed electrician in your
area for advice. Removing or altering any part of the heater is unsafe and will
also void your warranty.
©2020 EdenPURE® I-5670 BR12018R-1
Classic Heater
•
1500 Watts with
Two Heat Settings
•
Thermal Shut-off Protection
•
Tip-Over Switch
•
Room Temperature
LED Display
•
Precision Temperature
Control
•
Easy Push-Button Controls
•
Remote Control
•
Advanced Dual Heating System (ADHS)
Owner's Manual
PLEASE READ AND
SAVE THESE INSTRUCTIONS
Model No.: A5986

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A5986 and is the answer not in the manual?

Questions and answers

Related Manuals for EdenPURE A5986

Summary of Contents for EdenPURE A5986

  • Page 1 NO. If you don’t have a grounded outlet, contact a licensed electrician in your area for advice. Removing or altering any part of the heater is unsafe and will Model No.: A5986 also void your warranty. Owner’s Manual...

  • Page 2: Important Instructions

    The use of any attachments and accessories or extension cords not recommended or sold by EdenPURE ® may cause hazards and void Can I use the heater and another appliance at the same time? the warranty.
  • Page 3 How to turn off the heater: 4. Do not operate the heater with a damaged cord or plug, or after the heater malfunctions, has been dropped, or damaged in any manner. Return the Switch to STANDBY mode or POWER OFF the heater. heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.

  • Page 4: Questions And Answers

    If the heater cycles ON/OFF without heating: ® heater and contact an EdenPURE Authorized Service Center. Please note: This is a smart heater that monitors the room temperature and 19. CHECK YOUR HEATER CORD AND PLUG CONNECTIONS. Faulty wall produces heat only when needed.

  • Page 5: Special Features

    This is a safety feature to avoid the possibility of fire should the unit be tipped accidentally. ® Advanced Dual Heating System (ADHS) - EdenPURE is the first to feature a dual heating system for maximum heat transfer rate. It combines the energy efficiency of infrared heat with the comfort of convection heat to heat your room fast and comfortably—without hot spots and cold spots.

  • Page 6: Heating Modes

    3. HEATING MODES Press the MODE button to toggle between the different modes: ECO, HIGH, LOW and STANDBY. Exit from any mode to stand-by mode by pressing the STANDBY button. EdenPURE ® 7800 Whipple Ave. NW 4. ECO MODE – 1500W/1000W N.

  • Page 7: Setting The Temperature

    Figure 2 Warning: Any other service needed must be performed by an authorized service representative. Do not attempt to service the unit yourself. Product Specifications Model No.: A5986 Voltage: 120V, 60Hz Current: Maximum continuous draw: 12.5 amps Output: 5200 BTUs Power: 1500 Watts Blower: Multi-blade;...

  • Page 8: Remote Control

    Remote Control Maintenance 1. Always turn the heater OFF and disconnect the cord from the electrical Before Use outlet before cleaning the unit. Battery has been installed in the remote control. 2. Light accumulation of dust may be removed from the heater with a soft cloth Before use please unplug the transparent plastic or vacuum cleaner.

Table of Contents