Kenwood MultiPro Classic FDM78 Instructions Manual page 9

before plugging in
Make sure your electricity supply is the same as the one shown
G
on the underside of your appliance.
Important – UK only
The wires in the cord are coloured as follows:
G
Green and Yellow = Earth, Blue = Neutral, Brown = Live.
The appliance must be protected by a 13A approved (BS1362)
G
fuse.
WARNING: THIS APPLIANCE MUST BE EARTHED.
Note:
G For non-rewireable plugs the fuse cover MUST be refitted when
replacing the fuse. If the fuse cover is lost then the plug must not
be used until a replacement can be obtained. The correct fuse
cover is identified by colour and a replacement may be obtained
from your Kenwood Authorised Repairer (see Service).
If a non-rewireable plug is cut off it must be DESTROYED
G
IMMEDIATELY. An electric shock hazard may arise if an
unwanted non-rewireable plug is inadvertently inserted into a 13A
socket outlet.
This appliance conforms to EC directive 2004/108/EC on
G
Electromagnetic Compatibility and EC regulation no. 1935/2004
of 27/10/2004 on materials intended for contact with food.
before using for the first time
1 Remove the plastic blade covers from the knife blade. Take
care the blades are very sharp. These covers should be
discarded as they are to protect the blade during manufacture
and transit only.
2 Wash the parts see 'care & cleaning'
key
processor
power unit
2
bowl with drive shaft
3
detachable drive shaft
4
lid
5
feed tube
6
pushers
7
safety interlocks
8
speed/pulse control
9
power on light
bk
cord storage (at back)
weighing function (TYPE FDM79)
bl
kg/lb button
bm
on/zero button
bn
display screen
bo
weighing tray
thermoresist blender
bp
filler cap
bq
lid
br
goblet
bs
sealing ring
bt
blade unit
ck
base
cl
filler cap vents
A - standard attachment
cm
knife blade
cn
dough tool
co
dual whisk
cp
max capacity disc
cq
4mm slicing/grating disc
cr
2mm slicing/grating disc
B - optional attachments
Not all the attachments listed below will be included with your food
processor model. Attachments are dependent upon the model
variant. For more information or to order additional attachments
refer to the "service and customer care" section.
cs
extra fine grater disc (if supplied)
ct
fine Julienne disc (if supplied)
dk
French fry disc (if supplied)
dl
folding tool (if supplied)
dm
mini bowl and blade (if supplied)
dn
grinding mill (if supplied)
do
citrus juicer (if supplied)
dp
metal juice extractor (if supplied)
dq
attachment storage box (if supplied)
to use your food processor
1 Fit the bowl to the power unit. Place the handle towards the right
hand side and turn forward
2 Fit an attachment over the bowl drive shaft.
Note: Detachable drive shaft
using the discs, mini bowl, whisk, folding tool and
citrus juicer.
Always fit the bowl and attachment onto the processor before
G
adding ingredients.
3 Fit the lid ensuring the top of the drive shaft/tool locates into the
3
centre of the lid .
The processor will not operate if the bowl or lid are
G
not fitted correctly into the interlock. Check that the
feed tube and bowl handle are situated to the right
hand front corner.
4 Plug in. The Power On light will come on. Select one of the
following options: -
Speed Control – manually select the required speed (refer to the
recommended speed chart).
Pulse – use the pulse (P) for short bursts. The pulse will operate
for as long as the control is held in position.
5 At the end of processing turn the speed control to the 'OFF'
position (Align the speed control with the power on light
Always switch off and unplug before removing the lid.
G
important
Your processor is not suitable for crushing or grinding coffee
G
beans, or converting granulated sugar to caster sugar.
7
1
until it locks.
2
should be fitted when
9
).