Yamaha DR2A17 EFI PTV Operator's Manual page 50

STORAGE
ENGINE PREPARATION
1
With the key removed and the spark
plug lead disconnected, turn the
clutch by hand until compression is
2
felt. This puts the valves in the
closed position.
3
CHASSIS
PREPARATION
1. Verify the tire pressure is set to
4
124 kPa, 1.26 kgf/cm
2. Clean exterior of the PTV and
apply a rust inhibitor.
5
3. Cover the PTV with a breathable
cover and store it in a dry,
well-ventilated area.
6
7
8
9
10
11
9-2
BATTERY PREPARATION
1. Remove the battery from your
2. Have the battery recharged every
3. Batteries like the one supplied
2 (18 psi).
Do not allow cleaning solution to
enter battery cells. Serious battery
damage can result.
4. Clean the top of the battery with
PTV and store it in a cool, dry
place that stays between 0°C
(32°F) and 30°C (90°F).
60-90 days to keep it fully
charged. The battery must be
kept fully charged to avoid
damage.
with your car normally do not
require you to check the water
level inside the battery for the
one year warranty period
provided by the manufacturer.
NOTICE
a solution of baking soda and
water, as necessary, to remove
corrosion.
J0D