Using Manual-Adjust Function - Yamaha YSP-1100 Owner's Manual

Using manual-adjust function

You can adjust the beam angle manually while playing
back an input source. This function is also ideal if the
listening position is out of the operation guarantee range
of the auto-adjust function.
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/AV
YSP
2
Press MY BEAM on the remote control.
MY BEAM is displayed in the front panel display.
MY BEAM
3
Press / while MY BEAM is displayed to
adjust the angle.
Control range: L90° to R90°
• Press repeatedly to increase the horizontal angle
on the left side.
• Press repeatedly to increase the horizontal angle
on the right side.
ENTER
5
VOL
PLAYING BACK SOUND CLEARLY (My beam)
49
En