Front Panel; Troubleshooting - Peachtree Gan 1 Manual

B On Standby Button /
POWER switch set to ON, this button toggles the unit between On mode which
lights the LED blue and Standby mode which lights the LED red.
ISSUE
The GaN 1 will not power on
,
The GaN 1 powers on but there is no sound
• The GaN 1 meets European RoHS standards for non hazardous metals
• The GaN 1 draws less than half a watt of power in standby mode
• We are committed to continue exploring additional methods for making our products
even more environmentally friendly

FRONT PANEL

1
: With the AC power cord connected and the rear panel

TROUBLESHOOTING

Check that the power switch on the back panel
is on If it is the on standby LED on the front
panel LED should be lit red Check that the AC
outlet is functioning correctly by plugging in a
lamp or other device to confirm its operation.
Check that the product controlling the GaN 1
is turned on if using the 12V trigger input feature
of the
Check that the coaxial digital input is plugged
in properly. Check that the device controlling
the
suitably.
Interested in the Green Movement?
6
SOLUTIONS
. , /
.
.
GaN 1
GaN 1 is turned on and the volume is set
-