Table of Contents
Advertisement
1
B On Standby Button
/
POWER switch set to ON, this button toggles the unit between On mode which
lights the LED blue and Standby mode which lights the LED red.
ISSUE
The GaN400 will not power on
,
The GaN400 powers on but there is no sound
• The GaN400 meets European RoHS standards for non hazardous metals
• The GaN400 draws less than half a watt of power in standby mode
• The 400w amps in the GaN400 are an industry leading 96% efficient and generate
little heat as result.
• We are committed to continue exploring additional methods for making our products
even more environmentally friendly
FRONT PANEL
:With the AC power cord connected and the rear panel
TROUBLESHOOTING
Check that the power switch on the back panel
is on If it is the on standby LED on the front
panel LED should be lit red Check that the AC
outlet is functioning correctly by plugging in a
lamp or other device to confrm its operation.
Check that the product controlling the GaN400
is turned on if using the 12V trigger input feature
of the GaN500.
Check that the INPUT SELECTION switch
on the rear panel is set to the proper input:
UNBALANCED OR BALANCED Note Do
not change the input selection while the unit is
powered on.
Interested in the Green Movement?
GaN
SOLUTIONS
.
,
/
.
.
-
400
:
Advertisement
Table of Contents
