Case Ballet Care Instructions

Bench 1.9m

Care Instructions

Ballet Bench 1.9m – designed by Matthew Hilton

To prolong the life of the product and retain its appearance and functionality,

we would like to give you some relevant information and care advice:-

This unit is manufactured from solid oak.

Craftsmen manufacture this product and there is variety between each unit. This is

because wood is a natural product, with natural colour and grain variations.

Natural timber is affected by sunlight; this can can the wood colour to darken.

For this reason (especially if placed in direct sunlight) it is recommended that placing

objects in the same position for long periods of time is avoided. This potential colour

adjustment becomes less relevent as the product ages.

It is recommended that no abrasive cleaners or solvents are used to clean the unit.

Please only use proprietary furniture polishes or alternatively, warm water with

a diluted mild detergent.

We thank you for purchasing this product and wish you many years of enjoyable and

functional use.

For more related products please visit: casefurniture.com

Case Furniture Ltd

London, SW18 2HZ

United Kingdom

info@casefurniture.com

casefurniture.com

Ballet

Bench 1.9m

Table of Contents

Need help?

Do you have a question about the Ballet and is the answer not in the manual?

Page 1 Ballet Care Instructions Bench 1.9m Ballet Bench 1.9m – designed by Matthew Hilton To prolong the life of the product and retain its appearance and functionality, we would like to give you some relevant information and care advice:- This unit is manufactured from solid oak.
Page 2 Assembly Instructions Step 3. Place the 5 washers ( tting C) and bolts ( tting A) into the holes on the cross rail and 4 A x 5 washers ( tting C) and bolts ( tting B) into the holes in the legs. Make sure all the bolts are properly aligned, then use the supplied Alan key that has been provided to tighten all the bolts.