Case Ballet Care Instructions

Care Instructions

Ballet Table – designed by Matthew Hilton

To prolong the life of the product and retain its appearance and functionality,

we would like to give you some relevant information and care advice:-

This unit is manufactured from solid oak.

Craftsmen manufacture this product and there is variety between each unit. This is

because wood is a natural product, with natural colour and grain variations.

Natural timber is affected by sunlight; this can can the wood colour to darken.

For this reason (especially if placed in direct sunlight) it is recommended that placing

objects in the same position for long periods of time is avoided. This potential colour

adjustment becomes less relevent as the product ages.

It is recommended that no abrasive cleaners or solvents are used to clean the unit.

Please only use proprietary furniture polishes or alternatively, warm water with

a diluted mild detergent.

We thank you for purchasing this product and wish you many years of enjoyable and

functional use.

For more related products please visit: casefurniture.com

Case Furniture Ltd

London, SW18 2HZ

United Kingdom

info@casefurniture.com

casefurniture.com

Ballet

Table

Table of Contents

Need help?

Do you have a question about the Ballet and is the answer not in the manual?

Page 1 Ballet Care Instructions Table Ballet Table – designed by Matthew Hilton To prolong the life of the product and retain its appearance and functionality, we would like to give you some relevant information and care advice:- This unit is manufactured from solid oak.
Page 2 Assembly Instructions A x 8 B x 8 Required Supplied Step 1. Place the washers ( tting B) on the bolts ( tting A) Place the Bolt and washer into the holes on the rail as shown. Move the leg into place and align with the relevant holes.