Case Cross Fixed Table 100153725 Assembly Instructions
Case Cross Fixed Table 100153725 Assembly Instructions

Case Cross Fixed Table 100153725 Assembly Instructions

Advertisement

PRODUCT CARE

Cross Fixed Table - designed by Matthew Hilton
In order to understand and get pleasure and longevity from the
product we would like to give you some information: -
• The table is manufactured using Oak or Walnut. The legs and underframe
are solid and the top and extension leaves are veneered board for greater
stability.
• Skilled craftsmen manufacture this product and there is variety between
each table. Wood is a natural product and colour and grain variations
are inevitable.
• Natural timber is affected by sunlight; this can cause the wood colour
to darken. For this reason (especially if placed in direct sunlight) it is
recommended that placing objects long periods in the same position is
becomes less relevant with the passing of time
avoided. This colour adjustment
as the wood stabilizes.
• It is recommended that no abrasive cleaners or solvents
are used to clean the unit, please only use proprietary furniture
polishes or warm water with diluted detergent.
We thank you for purchasing the product and wish you many years of
enjoyable and functional use.
For more related products please visit: - www.casefurniture.com
Case Furniture Ltd.
London SW18 2HZ
United Kingdom
info@casefurniture.com
www.casefurniture.com
Cross Fixed Table
by Matthew Hilton

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cross Fixed Table 100153725 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Case Cross Fixed Table 100153725

  • Page 1 We thank you for purchasing the product and wish you many years of enjoyable and functional use. For more related products please visit: - www.casefurniture.com Case Furniture Ltd. London SW18 2HZ United Kingdom info@casefurniture.com...
  • Page 2 Cross Fixed Table by Matthew Hilton Assembly Instructions 1. Unpack all components and allow ample room for assembly and turning. 2. Illustration 1. Attach brackets (B) to all legs using allen key (A) and bolt (D). ENSURE THAT BRACKETS ARE THE CORRECT WAY UP.

This manual is also suitable for:

Cross fixed table 100153724

Table of Contents