Hunter Amberlin Manual page 2

We recommend that you pull everything out of the box and lay it out. We have
grouped the drawn components below with the hardware you'll need for those
parts. The screws below are drawn to scale to make it easier to identify what
piece of hardware is needed to install each component.
bag
For installing the hanger bracket and wiring the fan
x15
Grommet
bag
For installing the blades
Spare Parts
bag
For your convenience,
you may receive extra fasteners.
Remove the shipping blocks from the
motor. Save the screws. They will be
needed for blade iron installation.
Note: Some fans will have a shipping
ring instead of shipping blocks. Please
remove the ring and save the screws.
Here is what comes in your box:
Wood Screw
WIre Nut
Washer
x2 x4
x15
bag
Blade Screw
bag
Blade Arm
Pullchains and extra downrod
IMPORTANT
Note:
Fan style may vary.
Hunter Pro Tip:
x2
x10
Blade Arm Screw
Find a part that is missing or damaged?
Don't take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed on
each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
Ceiling Bracket
Canopy
bag
For installing the canopy
Upper Switch Housing
Lower Switch Housing
bag
Glass
x4
Bulb
x4
For installing the light fixture
1886
Canopy Screw
x2
x6
Light Kit Screw
1.888.830.1326.
3