Driver Awareness Features And Alerts; Enabling Or Disabling Driver Alerts - Garmin CAMPERCAM 795 Owner's Manual

The driver alerts and speed limit features are for information only. They do not replace your responsibility to
abide by all posted speed limit signs and to use safe driving judgement at all times. Garmin is not responsible
for any traffic fines or citations that you receive for failing to follow all applicable traffic laws and signs.
Your device provides features that can help encourage safer driving and increase efficiency, even when you are
driving in a familiar area. The device plays an audible tone or message and displays information for each alert.
You can enable or disable the audible tone for some types of driver alerts. Not all alerts are available in all areas.
Schools: the device plays a tone and displays the speed limit (if available) for an upcoming school or school
zone.
Speed limit exceeded: the device displays a red border on the speed limit icon when you exceed the posted
speed limit for the current road.
Speed limit reduced: the device plays a tone and displays the upcoming speed limit so you can be prepared to
adjust your speed.
Wrong way on a one-way street: the device plays a message and displays a full-screen warning if you travel the
wrong way on a one-way street. The edges of the screen appear red and an alert remains at the top of the
screen until you leave the one-way street or correct your direction of travel.
Level crossing: the device plays a tone to indicate an upcoming level crossing.
Animal crossing: the device plays a tone to indicate an upcoming animal crossing area.
Bends: the device plays a tone to indicate a bend in the road.
Slower traffic: the device plays a tone to indicate slower traffic when you approach slower traffic at a higher
speed. Your device must be receiving traffic information to use this feature
Construction zone: the device plays a tone and displays a message when you approach a construction zone.
Lane closure: the device plays a tone and displays a message when you approach a lane closure.
Break planning: the device plays a tone and suggests upcoming rest stops after you have been driving for a
long time.
Risk of grounding: the device plays a tone and displays a message when you approach a road where your
vehicle could become grounded.
Lateral wind: the device plays a tone and displays a message when you approach a road where there is risk of
lateral wind.
Narrow road: the device plays a tone and displays a message when you approach a road that may be too narrow
for your vehicle.
Steep hill: the device plays a tone and displays a message when you approach a steep hill.
County and country borders: the device plays a tone and displays a message when you approach the border of
a county or country.
Shut off propane: the device plays a tone and displays a message when you approach an area where propane
should be turned off.
Forward collision warning: the device alerts you when it detects that you are not maintaining a safe distance
between your vehicle and the vehicle in front of you.
Lane departure warning: the device alerts you when it detects you may be crossing a lane boundary
unintentionally.

Enabling or Disabling Driver Alerts

You can enable or disable several types of driver alerts.
1 Select > Driver Assistance > Driver Alerts.
2 Select or clear the tick box next to each alert.

Driver awareness features and alerts

Driver awareness features and alerts
CAUTION
(Traffic, page 41).
13