Table of Contents
Advertisement
■
Switching the door unlock function
It is possible to set which doors the entry function unlocks.
Turn the power switch off.
1
When the indicator on the key surface is turned off, push and hold
2
for approximately 5 seconds while pushing the
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
Multi-information
display
■
Using the mechanical key
The doors can also be locked and unlocked with the mechanical key.
(P. 633)
■
Open door warning buzzer
If the vehicle speed reaches 3 mph (5 km/h), the master warning light flashes
and a buzzer sounds to indicate that the door(s) is not fully closed.
The open door(s) is displayed on the multi-information display.
■
Conditions affecting the operation of the smart key system or wireless
remote control
P. 194
■
Customization
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features: P. 676)
PRIUS_OM_OM47E01U_(U)
3-2. Opening, closing and locking the doors
.)
2
Unlocking doors
Hold the driver's door handle
to unlock only the driver's
door.
Hold the passenger's door
handle or back door opener
to unlock all the doors.
Hold the front door handle or
back door opener to unlock
all the doors.
185
or
button on the key.
Beep
Exterior: Beeps three
times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
3
Advertisement
Table of Contents
