Toyota Prius V 2016 Manual page 396

396
6-4. Using the other interior features
Reprogramming a HomeLink
Press and hold the desired HomeLink
®
HomeLink
®
HomeLink
®
HomeLink
Release the buttons.
Erasing the entire HomeLink
Press and hold the 2 outside but-
tons for 10 seconds until the indi-
cator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
®
HomeLink
■
Before programming
●
Install a new battery in the remote control transmitter.
●
The battery side of the remote control transmitter must be pointed away
from the HomeLink
■
Certification for the garage door opener

For vehicles sold in the U.S.A.
FCC ID: NZLOBIHL4
NOTE:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

For vehicles sold in Canada
NOTE:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, includ-
ing interference that may cause undesired operation of the device.
■
When support is necessary
Visit on the web at www.homelink.com or call 1-800-355-3515.
PRIUS v_OM_OM47B12U_(U)
®
indicator light will start flashing slowly. Keep pressing the
button and press and hold the transmitter button until the
indicator light changes from a slow to a rapid flash.
®
memory (all three programs)
memory.
®
button.
button
®
button. After 20 seconds, the