Advertisement
Scenario A: NAT/Route Mode Gateway
For new network installations or installations where the Dell
SonicWALL NSA E8510 is replacing the existing network
gateway.
In this scenario, the Dell SonicWALL NSA E8510 is configured
in NAT/Route mode to operate as a single network gateway.
Two Internet sources may be routed through the Dell
SonicWALL appliance for load balancing and failover purposes.
Because only a single Dell SonicWALL appliance is deployed,
the added benefits of high availability with a stateful
synchronized pair are not available.
To set up this scenario, follow the steps covered in:
•
Initial Setup
- page 31
•
Additional Deployment Configuration
Note: Be sure to follow the steps in the
on page 31 before completing Additional Deployment
Configurations.
- page 46
Initial Setup
section,
A
SonicWALL NSA E-Class
Network Security Appliance
WLAN Zone
DMZ Zone
10GE
ISP 1
E8510
Internet
LAN Zone
Selecting a Deployment Scenario |
28
Advertisement
Chapters
