Cadillac Escalade 2022 Owner's Manual page 311

310 DRIVING AND OPERATING
Available camera views:
Rear Standard View
Hitch View
Bed View
Rear Trailer View
Interior Trailer View
Guidance Lines
Hitch Guidance
Troubleshooting
The Transparent Trailer calibration
may take longer than expected or not
calibrate if:
The vehicle is driven too fast during
calibration. Speed should be
maintained below 50 km/h
(31 mph).
The vehicle is not driven straight
during calibration. Steering should
be maintained as straight as
possible, excessive steering during
calibration may extend
calibration time.
The calibration is attempted in low
light. Calibration should be
attempted when there is enough
light.
The calibration is attempted during
adverse weather conditions.
Calibration during conditions such
as snow or heavy rain should be
avoided.
The road surface is not ideal for
calibration. Calibration should be
attempted on an alternate road
surface.
The accessory trailer cameras are
swapped at the hitch connector.
Ensure that the camera mounted to
the rear of the trailer is connected
to the rear trailer camera input.
The accessory trailer camera is
mounted, angled or rotated outside
of the defined mounting location
(see camera installation
instructions).
Distortion may be observed in the
calibrated Transparent Trailer View if:
The accessory trailer camera is
mounted, angled or rotated outside
of the defined mounting location
(see camera installation
instructions).
The Transparent Trailer icon may
appear grayed out if:
A compatible trailer profile is not
configured or a non-compatible
trailer profile is selected.
The vehicle is in R (Reverse).
The trailer is not connected.
The accessory rear trailer camera is
not connected or connected to the
incorrect input.
The preview may not be provided or
the wrong preview may be provided if:
The accessory cameras are not
recognized. Ensure that the
accessory camera(s) are connected
and power cycle the vehicle.
The accessory trailer cameras are
swapped at the hitch connector.
Ensure that the accessory camera(s)
are connected to the correct input.
The accessory trailer camera(s) are
connected to the correct camera
input.
The accessory trailer camera(s) are
not installed according to the
installation instructions.